End Ring Glue For Rotary Printing Screen Silicone Ring Gaskets Adhesives

End Ring Glue For Rotary Printing Screen Silicone Ring Gaskets Adhesives

Application:

1.Surface treatment:

Rubbing the end-ring and the screen end with a piece of abrasive paper, then cleaning the rubbed surface with acetone or absolute alcohol, drying.

2.Preparing the glue:

Mix the components A and B in a ratio of 1: 0.5~1homogeneously on a wooden or a rubber plate.

3.Coating:

Coat the binder evenly on both surfaces between the end-ring and the nicked screen with a scraper, coupling and removing the excessive binder.

4.Curing:

Curing at 80-120 for 20-30 minutes or 24 hours at interior temperature, or curing at 160-180℃ in a oven with photoemulsion simultaneously

Bicomponents A and B, A:B=1:0.5~1

Rapid curing, strong adhesive, thermostable and good water resistance

Suitable for adhering end-ring to nickel screen

Package:

Component a: 1kg per iron tank

Component b: 1kg per iron tank, and 10kg every case.

Storage:

One year at 5-35℃(in a sealed and dry place).

This product belongs to non-dangerous article.